SLS006-00 – PUSH-TO-CLOSE LATCH
Tumbler lock in bright chrome-plated zinc alloy. Latch in thermoplastic material.
Pair of nickel-plated steel keys. Mounting bracket in galvanized steel. Rotation 90° clockwise and 90° counter-clockwise, one key removal position. Lockwasher and mounting nut in nickel plated steel.
Download data sheet
SLC014-00 – SPRING LOADED LATCH
Spring loaded latch with stud 142 mm with “Turn & Pull” function. Latch stroke 32.5 mm. Dimensions: 40×76 mm.
Download data sheet
002053 – STAINLESS STEEL CAM
002053 – Plus 10 mm offset
Download data sheet
002056 – STAINLESS STEEL CAM
002056 – Plus 4 mm offset
Download data sheet
002057 – STAINLESS STEEL CAM
002057 – Plus 2 mm offset
Download data sheet
SLC013-00 – ARTICULATED HINGE
Hinge in galvanized steel in 3 pieces jointed between them. 180° rotation. Pins in stainless steel, provided with nuts and washers. Dimensions: 16x18x50.
Download data sheet
SLC012-02 – HINGE with friction 180° 60×140
Black powder coated steel flat hinge with friction. 180° rotation. Pin in Zinc-plated steel. Acetalic resin POM washers. Friction torque 1 Nm +/- 20%. Dimensions: 60×140.
Download data sheet
NC107-00/NC109-00/NC105-00/NC102-00/NC103-00 – CHROMIUM-PLATED ZINC DIE-CASTING ALLOY KEYS
NC107-00 – Double bit 4
NC109-00 – Triangular 7
NC105-00 – Triangular 8
NC102-00 – Square 7
NC103-00 – Square 8
Download data sheet
002092ZB/002093ZB – GALVANIZED STEEL CAMS
002092ZB – Plus 28 mm offset
002093ZB – Plus 30 mm offset
Download data sheet
002089ZB/002090ZB/002091ZB – GALVANIZED STEEL CAMS
002089ZB – Plus 22 mm offset
002090ZB – Plus 24 mm offset
002091ZB – Plus 26 mm offset
Download data sheet
002086ZB/002087ZB/002088ZB – GALVANIZED STEEL CAMS
002086ZB – Plus 16 mm offset
002087ZB – Plus 18 mm offset
002088ZB – Plus 20 mm offset
Download data sheet
002083ZB/002084ZB/002085ZB – GALVANIZED STEEL CAMS
002083ZB – Plus 10 mm offset
002084ZB – Plus 12 mm offset
002085ZB – Plus 14 mm offset
Download data sheet
002080ZB/002081ZB/002082ZB – GALVANIZED STEEL CAMS
002080ZB – Plus 4 mm offset
002081ZB – Plus 6 mm offset
002082ZB – Plus 8 mm offset
Download data sheet
002077ZB/002076ZB/002079ZB – GALVANIZED STEEL CAMS
002077ZB – Minus 8 mm offset
002076ZB – Minus 12 mm offset
002079ZB – Plus 2 mm offset
Download data sheet
002074ZB/002078ZB – GALVANIZED STEEL CAMS
002074ZB – Minus 2 mm offset
002078ZB – Minus 4 mm offset
Download data sheet
SLC010-04 – HINGE WITH SEAL BYPASS
Brushed stainless steel AISI304 flat hinge with friction. 7mm seal bypass function. Both pin and hinge of the same material. Acetalic resin POM washers. Friction torque 1 Nm +/-
20%. Weight: 400 gr.
Download data sheet
SLC008-01 – 115° ROTATION FRICTION HINGE
Black polyamide friction hinge with hole caps. 115° rotation. Centre-to-centre hole distance 34×34. Symmetrical friction torque 1,7 Nm. Dimensions: 57×59 mm.
Download data sheet
SLC008-00 – 115° ROTATION FRICTION HINGE
Black polyamide friction hinge with hole caps. 115° rotation. Centre-to-centre hole distance 34×34. Symmetrical friction torque 1,1 Nm. Dimensions: 57×50 mm.
Download data sheet
SLC007-02/05/12/15 – HINGE WITH CTC DISTANCE 36X36
Black powder coated zinc alloy hinge. 270° rotation. Right hand and left hand version. Pin in stainless steel. Available with holes for countesunk screws and with threaded studs. Centreto-centre hole/stud distance 36×36. Dimensions: 60×60
Download data sheet
SLC007-01/04/11/14 – HINGE WITH CTC DISTANCE 30X30
Black powder coated zinc alloy hinge. 270° rotation. Right hand and left hand version. Pin in stainless steel. Available with holes for countesunk screws and with threaded studs. Centre-tocentre hole/stud distance 30×30. Dimensions: 50×50
Download data sheet
SLC007-00/03/10/13 – HINGE WITH CTC DISTANCE 25X25
Black powder coated zinc alloy hinge. 270° rotation. Right hand and left hand version. Pin in stainless steel. Available with holes for countesunk screws and with threaded studs. Centreto-centre hole/stud distance 25×25. Dimensions: 40×40
Download data sheet
SLC006-00 – 180° ROTATION FRICTION HINGE
Black powder coated zinc alloy friction hinge. 180° rotation. Centre-to-centre hole distance 34×34. Friction torque 3,4 Nm.
Download data sheet
SLC005-01/02/03/04 – HINGE WITH CTC DISTANCE 40X40
Zinc-plated steel, black powder coated steel or stainless steel flat hinge with friction. 180° rotation. Centre-to-centre hole distance 40×40. Both pin and hinge of the same material. Acetalic resin POM washers. Friction torque 1 Nm +/- 20%.
Download data sheet
SLC004-01/02/03/04 – HINGE WITH CTC DISTANCE 44X44
Zinc-plated steel, black powder coated steel or stainless steel flat hinge with friction. 180° rotation. Centre-to-centre hole distance 44×44. Both pin and hinge of the same material. Acetalic resin POM washers. Friction torque 1 Nm +/- 20%.
Download data sheet
SLC003-00 – 180° ROTATION HINGE
Black powder coated zinc alloy hinge with stainless steel pin. 180° rotation. Screws M6x8 not included.
Download data sheet
SLC002-00 – 180° ROTATION HINGE
Black powder coated zinc alloy hinge. 180° rotation. Provided with 4 screws M5 not mounted.
Download data sheet
SLC001-00 – 180° ROTATION HINGE
Cerniera in poliammide nera con perno in acciaio zincato. Rotazione 180°.
Download data sheet
SLM013-00/01 – SWINGHANDLE WITH COMPRESSION SYSTEM
Black powder coated zinc alloy plate and handle. otation 90° clockwise or counterclockwise. Available with or without lock. Protection rating IP54 against water and dust. Compression movement when closing the handle (3,5 mm). Suggested cam to be ordered separately, part # SLK006-00.
Download data sheet
SLM010-01 – PUSH BUTTON PROFILE HALF CYLINDER
Black polyamide latch for handles with profile cylinder. The latch is opened by pushing the button on the front. Provided with zinc-plated mounting screw.
Download data sheet
SLQ011-00 – QUARTER-TURN KNOB
Quarter turn knob in ellipse shape. Body in galvanized zinc die-casting alloy and knob in dark grey plastic. Rotation 90° clockwise. Max sheet thickness = 6,5 mm. Cam has to be ordered separately.
Download data sheet
SLQ009-00 – STAINLESS STEEL QUARTER-TURN LOCK IP69K FOR HYGIENIC AREAS
Stainless steel AISI 316 quarter turn lock , with protection against dust and water according to IP69K. Rotation 90° clockwise or anti-clockwise. The lock with this insert fulfills the hygienic demands according to DIN EN 1672-2 / EN 14159. Provided with nut and screw for cam. Max sheet thickness = 7 mm. Available cams at pages F1-F7. Available cams at pages F1-F7. Key has to be ordered separately.
Download data sheet
SLQ007-00 – PADLOCKABLE LOCK WITH KNOB
Nickel-plated zinc alloy padlockable lock with knob. Rotation 90° clockwise. Rubber washer. Use padlocks with bow with diameters from 6 mm to 7 mm . Provided with rubber washer, thooted washer, nut and screw for cam. Cams with square 7 mm.
Download data sheet
SLQ002-00 – KNOB FOR PADLOCK
Black powder coated zinc alloy quarter turn knob. Rotation 90° clockwise or 90° counterclockwise, depending on how the knob is mounted. Mounting nut and screw in galvanized steel. Rubber washer. Protection class IP65. Usable with padlocks with shackle diameter from 5 to 7,5 mm or from 8 to 10 mm. Max sheet thickness = 7 mm. Available cams at pages F1-F7.
Download data sheet
SLS004-04/05 – TUBOLAR KEY LOCK
Bright chrome-plated zinc alloy lock, with 7 radial pins and 100 key combinations. Pair of zinc plated overmolded tubular keys. Rotation 90° clockwise or 90°counterclockwise, depending on how the back washer supplied is mounted, one key removal position. Lockwasher and mounting nut in nickel plated steel. The cam can be assembled in four positions. Cylinder length = 28 mm. Max sheet thickness = 19 mm.
Download data sheet
SLS004-02 – TUBOLAR KEY LOCK
Bright chrome-plated zinc alloy lock, with 7 radial pins and 1 key combination. Pair of zinc plated overmolded tubular keys. Rotation 90° clockwise or 90°counterclockwise, depending on how the back washer supplied is mounted, one key removal position. Lockwasher and mounting nut in nickel plated steel. The cam can be assembled in four positions. Cylinder length = 23 mm. Max sheet thickness = 14 mm.
Download data sheet
SLS004-00/01 – TUBOLAR KEY LOCK
Bright chrome-plated zinc alloy lock, with 7 radial pins and 100 key combinations. Pair of zinc plated overmolded tubular keys. Rotation 90° clockwise or 90°counterclockwise, depending on how the back washer supplied is mounted, one key removal position. Lockwasher and mounting nut in nickel plated steel. The cam can be assembled in four positions. Cylinder length = 17 mm. Max sheet thickness = 7,5 mm.
Download data sheet
SLS003-02/03 – TUBOLAR KEY SWITCHLOCK
Bright chrome-plated zinc alloy lock, with 7 radial pins, 100 key combinations. Pair of zinc plated overmolded tubular keys. Rotation 90° clockwise one key removal position. Lockwasher and mounting nut in nickel plated steel. Faston tabs. Max voltage: 24V d.c. Max current: 1 A.
Download data sheet
SLS003-00/01 – TUBULAR KEY SWITCHLOCK WITH SPRING
Bright chrome-plated zinc alloy lock, with 7 radial pins, 100 key combinations and spring retourn system. The key rotates from position 0 to position 1 and retruns back to position 0 by internal spring. Pair of zinc plated overmolded tubular keys. Rotation 90° clockwise one key removal position. Lockwasher and mounting nut in nickel plated steel. Faston tabs. Max voltage: 24V d.c.
Max current: 1 A.
Download data sheet
SLS001-00 – PUSH-TO-CLOSE LATCH
Tumbler lock in bright chrome-plated zinc alloy. Latch in thermoplastic material.
Pair of nickel-plated steel keys, keyed alike CH751. Mounting bracket in galvanized steel. Rotation 90° clockwise and 90° counter-clockwise, one key removal position. Lockwasher and mounting nut in nickel plated steel.
Download data sheet